How to eliminate the soft failure of CNC machine tools?

September 29, 2023

The soft failure of CNC machine tools can basically be divided into two categories:

The first type is caused by the problem of machine parameters in the NC system (sometimes due to improper settings, sometimes due to unexpected changes in the parameters or confusion), for such soft faults, as long as the parameters are adjusted, the fault will disappear naturally.

The second category of soft faults is generally caused by accidental causes of the NC system in an endless loop. For such failures, generally adopt a forced reset method to restart the system.

In order to facilitate understanding, Xiao Bian explained in detail through two examples:

1. A CNC lathe of the FANUC-OT system has crashed every time the CNC machine is turned on, and any command cannot be operated normally. After the forced reset method is adopted, the system memory is cleared to zero and the system returns to normal. After re-entering the machine parameters and programs, the machine tool is used normally. This failure is caused by the confusion of machine parameters.

2, a special CNC milling machine, Siemens CNC system, in the batch processing CNC system displays the alarm "LIMITSWITCH", this kind of failure is because the Y axis stroke exceeds the software set limit value, check the program value does not change. After careful observation of the fault phenomenon, when the fault occurs, the displayed Y-axis coordinates are determined to reach the software limit. After careful study, it is found that the input of the compensation value becomes large. After the software limit setting is properly adjusted, the fault is eliminated. This fault is caused by incorrect setting of software CNC limit parameters.

Bizimle iletişime geçin

Author:

Ms. SU LAN RONG

E-posta:

susu@cn-tianhui.com

Phone/WhatsApp:

++86 13396680822

Popüler Ürünler

Şirket haberleri

OEM sıcak dövme ve CNC işleme metal özelliği

November 18, 2024

Boru hassas parçaları

November 11, 2024

You may also like

Related Categories

Bu tedarikçi için e-posta

Konu:

E-posta:

İleti:

Your message must be betwwen 20-8000 characters

Bizimle iletişime geçin

Author:

Ms. SU LAN RONG

E-posta:

susu@cn-tianhui.com

Phone/WhatsApp:

++86 13396680822

Popüler Ürünler

Şirket haberleri

OEM sıcak dövme ve CNC işleme metal özelliği

November 18, 2024

Boru hassas parçaları

November 11, 2024

Blog News

"Rethinking the Global Mobile Speed Countdown: A Call to Action for Operators and Regulators"

November 06, 2024

"Flavorful Experiences: The Lighting Design Journey of Aaya London Restaurant"

November 06, 2024